M41-A Pulse Rifles
Below are pictures of our Colonist's personal Pulse Rifles.
|
|
"What I think of the SD Studios Pulse Rifle, I'd say it was the best $4000.00 Investment I've made. It weighs over 20 pounds, made from actual and replica components, has a working counter and resets when you pull the clip out and slap it back in, working trigger and bolt action, functional sliding stock, and the grenade launcher can hold up to 2 grenades in its chamber (3 if you cycle one into the firing position), and cycles them out." -Bughunter |
|
|
"I
received this kit in a trade for a finished pulse rifle kit a while
back and after selling my Gary Weaver pulse rifle I decided I needed
a new rifle for costuming so I opened this one up and started on it.
First off I have to say this was a pretty good cast. It was strait,crisp,and
very lightweight for a solid resin prop! after I did a lot of cleanup
and sanding to the kit I then started filling the holes and resculpting
in a few places. One of the first things I noticed about the replica
was its striking resemblence to an ICONS stunt rifle. So to alter the
kit a bit I decided to shorten the stock by cutting it down and I removed
the "greblie" thing on the side of the rifle shroud. After I painted
and weathered the rifle I was very happy with it. I give this prop a
7 out of 10. The only draw backs to this kit is in certain places I
had to do a bit of rebuilding to the trigger guard and magazine well
part on the shroud. The stock was too long for my taste and I had to
take off the greblie thing on the side of the shroud. But for the price
it's a really great deal and you would be hard pressed to find a nicer
resin pulse rifle kit in that price range." - Headhunter
|
